Kavach Max is a high performance exterior wall finish. It comes with a unique Colour Stay technology which ensures long lasting colours. It's high Dirt Pick-up Resistance and Advanced Anti-Algal Formula ensures that the walls remain clean and fresh looking for a long time.

DIRECTIONS FOR USE

• Sand the surface with sand paper no. 180 to remove loose particles or dirt and wipe clean.
• Apply 2 coat of Wall Beauty Putty and allow drying for 4-6 hours.
• Smoothen the surface with coats of Wall Beauty Acrylic Wall Putty. Allow drying for 4-6 hours. Sand the surface with sand paper no. 180 and wipe clean.
• Apply one coat of Wall Beauty Primer and allow drying for 4-6 hours. Sand the surface with sand paper no. 320 or 400 and wipe clean.
• Apply 2-3 coats of Kavach Max a 4-6 hours Gap between each coat using a felt roller. For best result use roller for application.
  
  
  Close

Wall Beauty Suraksha Kavach is a high Performance Exterior/Interior Wall Finish. It comes with a Unique colour stay technology which ensures long lasting colours. Its high Dirt Pick-up resistance and advanced Anti-Algal formula ensures that the wall remain clean and fresh looking for a long time.
Suraksha Kavach, the most advanced Exterior/Interior Emulsion that you can gift your dream home.

DIRECTIONS FOR USE

• Clean the surface thoroughly using a wire brush and remove loose material from the surface.
• Surface imperfection such as holes dint fine cracks are to be filled with wall beauty wall putty or a mixture of white cement and fine sand in the ratio 1:3.
• For both fresh as well as re-painting surface. Apply one coat of Wall Beauty Exterior Wall Primer by mixing primer and water in the ratio of 1:1.
• Apply 2-3 coats by diluting 1 litre of Wall Beauty Suraksha Kavach with a maximum of 400 ml of water. Keep a interval of 4-6 hours between two coats.
• Ensure the horizontal surface like tops of windows, ledges etc. are painted with an additional third coat of Suraksha Kavach for greater protection.
  

  SPECIAL PRECAUTIONS
  

  • Freshly plastered surface must be allowed to cure completely before painting.
  • The paint should not be applied on surface of substances which are subjected to continue seepage or dampness.
  • If the undertaking surface exhibits chalkiness, in spite of thorough surface cleaning, use Wall Beauty putty.
  • Application of Exterior Wall Beauty Primer is mandatory for all surfaces. Not doing so can lead to failure of the paint film.
    
    
    Close

USAGE

Filling and smoothing of Interior wall, concrete & architectural buildings.

Safety Health & Environmental Information

ECO FRIENDLY

Contains no added lead, Mercury, Chromium compounds.

PRECAUTIONS

Store the product in well ventilated location and away from the source of fire and ignition. Use only with adequate ventilation. Do not take internally. Keep out of the reach of the children. Avoid contact with the skin, eye and breathing of vapours. Wash hands thoroughly after handling especially before eating. Keep container tightly closed and upright when not in use. Avoid conditions which results information of inhale able such as spraying or sanding painted surfaces. If such condition cannot be avoided, use appropriate respiratory protection.

SURFACE PREPARATION

First of all prepare a smooth and uniform surface. This can be done by scraping the old painted surface and removing the flaking particles, all the dirt or dust which is present on the surface.

MIXING

Now stir the material and strain it before use. Now thin the paint with 5% to 10% of clean water by volume, but do not over thin.
Apply at least two to three coats with blage/patti.

Acrylic Exterior Primer is a premium quality base coat for exterior/interior walls and ceilings. It is made from hi-performance emulsions, fillers, latex and additives. It provides ultimate bonding between upper coat and surface.

USAGE

Interior Wall, Brickwork, Concrete & Architectural buildings, ceiling & trim.

SURFACE PREPARATION

First of all prepare a smooth and uniform surface. This can be done by scraping the old painted surface and removing the flecking particles, all the dirt or dust which is present on the surface.

MIXING

Now stri and material and strain it before use. Now thin the paint with 30% to 50% of clean water by volume, but do not over thin. Apply at least one to two coats to super finish with brush.

APPLICATION

A brush, roller or spray-gun can be used to apply paint. The equipment should be washed after use.

RECOATING

Let the coat dry. Leave it for 2 to 3 hours then apply another coat.

ECO FRIENDLY

Contains no added lead, Mercury, Chromium compounds.

USAGE

Interior Surface

COVERING CAPACITY

10-12 sq. mt. per kg 2 coat depending the shade, surface and surface texture.

METHOD OF APPLICATION

Brush, Roller, Spray

FINISH

Smooth, Matt and Beautiful

PACKING AVAILABLE

20 kg, 10 kg..

DIRECTIONS FOR USE

Apply Wall Beauty Acrylic Distemper on the new surface. Fill the rough surface with Wall Beauty Putty. Add 500-600 ml of water in 1 kg of Wall Beauty Acrylic Distemper. Apply 2-3 coats after a gap of 3-4 hours between each coat.

PROPERTIES

Wall Beauty wall putty is both hydraulically and organically bound, guaranteeing good adhesion to the surface. Due to its composition of polymers, white cement and the precisely graded fillers resulting a smooth, high quality surface on walls and ceilings.

AREA OF USE

For filling and repairing fine cracks, defects in concrete, blockwork and brickwork, in order to produce a surface of highest quality for final paint.

PREPARATION OF SURFACE

First of all remove oil, grease, dirt and all loost particles. Emery paper, wire brush and puffy blade should be used for this pripose. Surface should be moistened with water prior to the application of Wall Beauty wall putty.

MIXING INSTRUCTION

Mix the Wall Beauty wall putty with the recommended water i.e. (6-7 litres per 20 kg nag) with a high speed mixer or with a hand agitator for 3-5 minutes. In normal conditions, keep the Wall Beauty mixture putty for 10 minutes, restir and use.

POT LIFE

Mixed material should be used within 1 hour.

COVERAGE

Approximately 20-25 sq ft/kg (1.5mm thickness).

WATER CONSUMPTION

7 lt water/20 kg.

Ego Exterior Emulsion is a high Performance Exterior Wall Finish. It comes with a Unique colour stay technology which ensures long lasting colours. Its high Dirt Pick-up resistance and advanced Anti-Algal formula ensures that the wall remain clean and fresh looking for a long time.

DIRECTIONS FOR USE

• Sand the surface with a Sand Paper no. 180 to remove loose particular or Dirt and wipe clean.
• Apply two coat of Wall beauty putty and allow drying for 4 to 6 hour.
• Apply one coat of Wall Beauty Primer and allow drying for 4 to 6 hour. Sand the surface with sand paper no. 320 or no. 400 and wipe clean.
• Apply 2-3 coats Ego Exterior Emulsion with 4-6 hours gap between each coat using a felt roller.For best result use roller for application.

Close

Ego Interior Emulsion is a high Performance Interior Wall Finish. It comes with a Unique colour stay technology which ensures long lasting colours. Its high Dirt Pick-up resistance and advanced Anti-Algal formula ensures that the wall remain clean and fresh looking for a long time.

DIRECTIONS FOR USE

• Sand the surface with a Sand Paper no. 180 to remove loose particular or Dirt and wipe clean.
• Apply two coat of Wall beauty putty and allow drying for 4 to 6 hour.
• Smoothen the surface with coats of wall beauty Acrylic wall putty. Allow drying for 4-6 hour. Sand the surface with sand paper no. 180 and wipe clean.
• Apply one coat of Wall Beauty Primer and allow drying for 4 to 6 hour. Sand the surface with sand paper no. 320 or no. 400 and wipe clean.
• Apply 2-3 coats Ego Exterior Emulsion with 4-6 hours gap between each coat using a felt roller.For best result use roller for application.

Close

Acrylic Interior Primer is a premium quality base coat for interior walls and ceilings. It is made from hi-performance emulsions, fillers, latex and additives. It provides ultimate bonding between upper coat and surface.

USAGE

Interior Wall, Brickwork, Concrete & Architectural buildings, ceiling & trim.

SURFACE PREPARATION

First of all prepare a smooth and uniform surface. This can be done by scraping the old painted surface and removing the flecking particles, all the dirt or dust which is present on the surface.

MIXING

Now stri and material and strain it before use. Now thin the paint with 30% to 50% of clean water by volume, but do not over thin. Apply at least one to two coats to super finish with brush.

APPLICATION

A brush, roller or spray-gun can be used to apply paint. The equipment should be washed after use.

RECOATING

Let the coat dry. Leave it for 2 to 3 hours then apply another coat.

ECO FRIENDLY

Contains no added lead, Mercury, Chromium compounds.